Best Bounce House Blowers: Replacement and Commercial (2026)
Bounce house blowers compared on amps, airflow and static pressure rather than horsepower labels, with the makers' rules on GFCI outlets and replacements.

Affiliate disclosure: product links on this page go to Amazon, or to the maker's own store for brands that sell only direct. As an Amazon Associate we earn from qualifying purchases, at no extra cost to you; a link to a maker's store earns us nothing. No retailer or brand sees our picks before they are published or has any say in them. How we choose.
First, the blower that came with your bounce house is the one the maker wants you to use: Little Tikes says only the supplied blower should be used, and Bounceland says to inflate only with the provided blower or a replacement the maker specifies. If yours has died, ask the maker for its replacement model before buying anything else.
For a commercial vinyl unit or an obstacle course, the B-Air Kodiak 1 HP is the blower we would buy: 1,170 CFM at 10.6 A, 8.8 in of static pressure and ETL listing, per its listing. For big combos, the Kodiak 1.5 HP adds airflow for less than a single extra amp. For the lowest amp draw at about 1,000 CFM, XPOWER's BR-272A draws 8 A.
Shop by amps and airflow, not horsepower. XPOWER sells the BR-272A as a "1 HP" blower, but its own manual lists the motor at 1/8 HP. The amps tell you what the outlet sees; the CFM and static pressure tell you what the bounce house gets.
Our top picks at a glance
1. Best overall
B-Air Kodiak 1 HP Blower (KP-1 ETL)Amps: 10.6 A at 115 V (per the Amazon listing) · Airflow: 1,170 CFM max (per the Amazon listing) · Static pressure: 8.8 in max (per the Amazon listing) · Certification: C-ETL-US (per the Amazon listing)
2. Best for big combos
B-Air Kodiak 1.5 HP Blower (KP-1.5 ETL)Amps: 11.5 A at 115 V (per the Amazon listing) · Airflow: 1,290 CFM max (per the Amazon listing) · Static pressure: 9.8 in max (per the Amazon listing) · Certification: C-ETL-US (per the Amazon listing)
3. Lowest amps for its airflow
XPOWER BR-272A High Static Inflatable BlowerAmps: 8 A at 120 V (XPOWER manual) · Airflow: 1,000 CFM rated (XPOWER manual) · Static pressure: High static design (figure not in the manual) · Certification: ETL / CETL (per the listing)
4. Best small blower
XPOWER BR-35 Inflatable BlowerAmps: 5.5 A (per the Amazon listing) · Airflow: Not in the listing · Static pressure: Not in the listing · Certification: ETL / CETL (per the listing)
5. Best budget commercial
VEVOR 1100 W Dual-Power Inflatable Blower (S-U12)Amps: Not in the listing · Airflow: Not in the listing · Static pressure: Not in the listing · Certification: IP24 water rating (per the listing)
| Pick | Amps | Airflow | Static pressure | Certification | Buy |
|---|---|---|---|---|---|
| B-Air Kodiak 1 HP Blower (KP-1 ETL)Best overall | 10.6 A at 115 V (per the Amazon listing) | 1,170 CFM max (per the Amazon listing) | 8.8 in max (per the Amazon listing) | C-ETL-US (per the Amazon listing) | Amazon |
| B-Air Kodiak 1.5 HP Blower (KP-1.5 ETL)Best for big combos | 11.5 A at 115 V (per the Amazon listing) | 1,290 CFM max (per the Amazon listing) | 9.8 in max (per the Amazon listing) | C-ETL-US (per the Amazon listing) | Amazon |
| XPOWER BR-272A High Static Inflatable BlowerLowest amps for its airflow | 8 A at 120 V (XPOWER manual) | 1,000 CFM rated (XPOWER manual) | High static design (figure not in the manual) | ETL / CETL (per the listing) | Amazon |
| XPOWER BR-35 Inflatable BlowerBest small blower | 5.5 A (per the Amazon listing) | Not in the listing | Not in the listing | ETL / CETL (per the listing) | Amazon |
| VEVOR 1100 W Dual-Power Inflatable Blower (S-U12)Best budget commercial | Not in the listing | Not in the listing | Not in the listing | IP24 water rating (per the listing) | Amazon |
Best overall
B-Air Kodiak 1 HP Blower (KP-1 ETL)
A well-documented 1 HP blower for 13 by 13 ft vinyl units and obstacle courses, at 10.6 A.
- Amps
- 10.6 A at 115 V (per the Amazon listing)
- Airflow
- 1,170 CFM max (per the Amazon listing)
- Static pressure
- 8.8 in max (per the Amazon listing)
- Certification
- C-ETL-US (per the Amazon listing)
Pros
- Full spec line printed: amps, CFM, static pressure, RPM, weight
- Reverse air louver and stackable rotomolded housing
- Sold by B-Air's parent company, Aer Industries
Cons
- 33 lb, heavier than the others
- Too much blower for a residential nylon bouncer
B-Air's Kodiak KP-1 is a rental-industry standard, and its listing prints the spec line we want from every blower: 1 HP motor, 115 V, 60 Hz, 10.6 A, 8.8 in maximum static pressure, 1,170 CFM maximum airflow, 3,460 RPM, 33 lb, and C-ETL-US safety certification, with a one-year warranty.
It suits the vinyl units on our commercial bounce house page and the obstacle courses, which ship with 750 W to 1.5 HP blowers. It is not a better blower for a small residential bouncer: those makers specify their own small blowers, and a residential manual is the rule to follow.
Best for big combos
B-Air Kodiak 1.5 HP Blower (KP-1.5 ETL)
More airflow and pressure than the 1 HP Kodiak for less than one extra amp, and lighter.
- Amps
- 11.5 A at 115 V (per the Amazon listing)
- Airflow
- 1,290 CFM max (per the Amazon listing)
- Static pressure
- 9.8 in max (per the Amazon listing)
- Certification
- C-ETL-US (per the Amazon listing)
Pros
- Highest airflow and static pressure here
- 28 lb, lighter than the 1 HP Kodiak
- Sold by Amazon itself when we checked
Cons
- 11.5 A leaves little room on a 15 A circuit
- Oversized for most backyard units
The Kodiak KP-1.5 is the bigger sibling: 1.5 HP, 11.5 A, 1,290 CFM and 9.8 in of static pressure per the listing, in a 28 lb housing. That extra pressure is for large combos, dual-lane slides and long obstacle courses with several chambers.
Watch the circuit. At 11.5 A it takes most of a standard 15 A household circuit by itself; give it a GFCI outlet with nothing else big on that circuit.
Lowest amps for its airflow
XPOWER BR-272A High Static Inflatable Blower
About 1,000 CFM for 8 A, with a 12 ft 12 AWG cord and a clear manual.
- Amps
- 8 A at 120 V (XPOWER manual)
- Airflow
- 1,000 CFM rated (XPOWER manual)
- Static pressure
- High static design (figure not in the manual)
- Certification
- ETL / CETL (per the listing)
Pros
- 8 A leaves headroom on a 15 A circuit
- 12 ft, 12 AWG cord, per the manual
- One-year limited warranty with parts, labor and one-way shipping
Cons
- Sold as "1 HP" but the manual lists a 1/8 HP motor
- Scarce on Amazon when we checked
XPOWER's BR-272A manual is a model of what a blower manual should give you: 120 V, 8 A, 1,000 CFM rated airflow, 21.2 lb, a 12 ft 12 AWG cord, and plain rules: plug into a grounded GFCI outlet only, never use a 3-prong to 2-prong adapter, never use a speed control, never clean it with water. The warranty is one year including parts, labor and one-way shipping, excluding the cord and consumables.
The same manual lists the motor at 1/8 HP, while the listing calls it 1 HP. That is the clearest example we found of why horsepower is a poor way to compare blowers. The bigger BR-282A in the same manual moves 1,500 CFM at 12 A.
Best small blower
XPOWER BR-35 Inflatable Blower
A 5.5 A blower the listing sizes for bounce houses up to 6 by 6 ft and movie screens up to 16 ft.
- Amps
- 5.5 A (per the Amazon listing)
- Airflow
- Not in the listing
- Static pressure
- Not in the listing
- Certification
- ETL / CETL (per the listing)
Pros
- Low draw for small units and movie screens
- No switch: plug in and it runs
- Sold by Amazon itself
Cons
- Only for small units, per its own listing
- No CFM figure in the listing
For a mini bouncer or an inflatable movie screen, XPOWER's BR-35 is a 5.5 A blower the listing sizes for bounce houses up to 6 by 6 ft and screens up to 16 ft, with a weather-resistant design and ETL listing. It has no power switch; it runs when plugged in.
Even for a small bouncer, check the original maker first: if Bounceland or Little Tikes will sell you the matching blower, that is the one their manuals allow.
Best budget commercial
VEVOR 1100 W Dual-Power Inflatable Blower (S-U12)
An 1,100 W dual-setting blower with an IP24 splash rating and a reverse louver, sold by Amazon.
- Amps
- Not in the listing
- Airflow
- Not in the listing
- Static pressure
- Not in the listing
- Certification
- IP24 water rating (per the listing)
Pros
- Two power settings (1.5 and 1.7 HP labels)
- IP24 rating for light rain and dust
- 24 lb with a carry handle; stackable
Cons
- No amps, CFM or safety listing in the listing
- Horsepower labels, not measured airflow
VEVOR's S-U12 is the budget option: 1,100 W with two power settings, a reverse louver to stop backflow, a PP shock-resistant case rated IP24 for light rain and dust, and a one-year warranty, per the listing. It is 24 lb and stackable.
What the listing does not give is amps, CFM or a UL or ETL listing, which the B-Air and XPOWER blowers do. Read the plate on the blower before you plug it in, and treat it as a spare rather than the only blower for a party.
How we chose
We compared blowers on the numbers that describe what they do: amps (what the circuit sees), airflow in CFM and static pressure (what the inflatable gets), and a safety listing (UL or ETL). Blowers with a published spec line rank ahead of those sold on a horsepower label alone.
Buying guide
Replace like for like
Residential bouncers are designed around a specific small blower. Little Tikes' current blowers are rated 115 V at 2.8 A and 322 W (Jr. Jump 'n Slide) and 3.8 A and 437 W (Jump 'n Double Slide); Bounceland's Daydreamer uses a 3.8 A, 0.6 HP blower. Both makers say to use only the supplied blower or a maker-specified replacement. A 1 HP commercial blower is not an upgrade for those units.
Amps and the circuit
Check the breaker that feeds your outdoor outlet. On a 15 A circuit, the Kodiak 1.5 HP's 11.5 A (per its listing) leaves little room for anything else; the 1 HP Kodiak draws 10.6 A and the XPOWER BR-272A 8 A per its manual. Run one big blower per circuit, and nothing else heavy on it. Zoom Blowers' 3 HP model goes further and needs a dedicated 20 A plug, per its title.
GFCI and cords
Every manual we read says GFCI. XPOWER says a grounded GFCI outlet only and no 3-prong to 2-prong adapters. Little Tikes says no extension cords at all on its bouncers. Keep the blower on dry, flat ground, staked if the maker provides stakes, with its intake clear of leaves.
Horsepower is marketing
Horsepower labels on inflatable blowers are not comparable. XPOWER's manual lists its "1 HP" BR-272A at 1/8 HP and its "2 HP" BR-282A at 1/4 HP. Compare amps and CFM instead.
Blowers side by side
| Blower | Amps | CFM | Static pressure | Weight | Source |
|---|---|---|---|---|---|
| XPOWER BR-35 | 5.5 A | Not listed | Not listed | Not listed | Listing |
| XPOWER BR-272A | 8 A | 1,000 | Not listed | 21.2 lb | Manual |
| B-Air Kodiak 1 HP | 10.6 A | 1,170 | 8.8 in | 33 lb | Listing |
| B-Air Kodiak 1.5 HP | 11.5 A | 1,290 | 9.8 in | 28 lb | Listing |
| XPOWER BR-282A | 12 A | 1,500 | Not listed | 22.0 lb | Manual |
What to skip
- Speed controls and dimmers. XPOWER, Little Tikes and Bounceland all say not to use a solid-state speed control with their blowers.
- Blowers with no spec plate. If there are no amps on the label, you cannot plan the circuit.
- Hosing the blower down. XPOWER says never clean it with water; Little Tikes says wipe it with a damp cloth.
Anchoring the blower and the unit is covered in our anchors and sandbags guide, and the full set of setup rules in bounce house safety rules.
Frequently asked questions
What size blower do I need for a bounce house?
The one the maker supplies or specifies. Residential bouncers use small blowers (Little Tikes' are 2.8 to 3.8 A; Bounceland's Daydreamer 3.8 A), while 13 by 13 ft vinyl units and obstacle courses use about 1 HP class blowers drawing 8 to 11.5 A.
Can I use a bigger blower on my bounce house?
Not on a residential bouncer. Little Tikes says only the supplied blower should be used and Bounceland says the provided blower or a manufacturer-specified replacement. Ask the maker for its replacement model.
How many amps does a bounce house blower use?
From about 2.8 A for a small Little Tikes blower to 11.5 A for a B-Air Kodiak 1.5 HP, per their manual and listing. A big blower can take most of a 15 A household circuit by itself.
Can I plug a bounce house blower into an extension cord?
Not with Little Tikes, whose manuals say no extension cords at all. XPOWER requires a grounded GFCI outlet and bans 3-prong to 2-prong adapters. Follow your own manual and keep cords out of water and walkways.
Why does my blower say 1 HP when the manual says 1/8 HP?
Horsepower labels on inflatable blowers are marketing. XPOWER sells the BR-272A as 1 HP, but its manual lists the motor at 1/8 HP with 8 A and 1,000 CFM. Compare amps and CFM, not horsepower.
Sources
- XPOWER High Static Blower Owner's Manual, Models BR-272A, BR-282A, BR-292A, XPOWER Manufacture
- White Jr. Jump 'n Slide Bouncer: Instructions (665721), Little Tikes
- White Jump 'n Double Slide Bouncer: Instructions (666209), Little Tikes
- Bounceland Owner's Manual and Safety Guidelines, Bounceland
- DayDreamer Cotton Candy Bounce House, Bounceland
Cover image: Illustration: Backyard Inflatable Review (AI-generated)
Related guides
Bounce House Anchors: Stakes, Sandbags and Wind Limits
Stakes, sandbags and tarps for bounce houses and water slides, and the wind speeds at which Little Tikes, Bounceland and CPSC say to stop.
Bounce House Safety Rules: Setup, Supervision and Water
The rules every bounce house manual repeats, plus what CPSC and Nationwide Children's Hospital add, in one checklist you can print for the party.
Bounce House Size Calculator: Will It Fit Your Yard?
Enter a bounce house (or pick one) and your lawn, and see the space it really needs once the makers' clearance zone is added.


