Skip to content
CalculatorHot Tubs

Inflatable Hot Tub Running Cost Calculator

Work out what an inflatable hot tub costs to heat and run: first heat-up, daily and monthly electricity, from the heater's watts, the gallons and your power price.

By Backyard Inflatable ReviewPublished 3 min readHow we research
The digital control panel of an inflatable hot tub showing a temperature, with the covered tub behind it

Affiliate disclosure: product links on this page go to Amazon, or to the maker's own store for brands that sell only direct. As an Amazon Associate we earn from qualifying purchases, at no extra cost to you; a link to a maker's store earns us nothing. No retailer or brand sees our picks before they are published or has any say in them. How we choose.

Pick a hot tub (or enter your own), set your tap water and target temperature, the hours a day your heater actually runs, and your electricity price. The calculator gives the energy and cost of the first heat-up and the daily and monthly running cost.

The presets use Intex's published PureSpa figures: a 1,300 W heater, 210 gallons for the 4-person and 290 for the 6-person. The default price of 18 cents per kWh is close to the U.S. residential average EIA reported for August 2026 (18.16 cents); use the price on your own bill.

What will the hot tub cost to run?

Intex manual 380PO: 1,300 W heater at 110-120 V, 210 gal, 2-3°F an hour.

watts
gal

The maker's figure at the fill line

°F
°F

104°F is the usual top setting

h
watts

Optional

h

Optional

$/kWh

18¢ is close to the EIA U.S. residential average (18.16¢, Aug 2026); use your bill

Per month (30 days)

$56.16

312 kWh

Per day

$1.87

10.4 kWh

First heat-up

$3.70

at least 20.5 kWh

Heat-up time

15.8 h

best case, 2.5°F an hour

Heat-up energy = gallons x 8.34 lb x the temperature rise, divided by 3,412 BTU per kWh (EIA's conversion). That is the least it can take: a real tub also loses heat through the cover and walls while it warms, so the maker's own heating rate is slower. The monthly figure multiplies the hours your heater actually runs by its rated watts; read the hours off your own use, because they swing with air temperature, wind and the cover.

How the calculator works

  • Heat-up energy = gallons x 8.34 lb x temperature rise (°F), divided by 3,412 BTU per kWh. One BTU raises one pound of water by 1°F, and one kWh equals 3,412 BTU, per EIA. Water weighs 8.34 lb a gallon, per USGS.
  • Heat-up time = that energy divided by the heater's kW. It is the best case: a real tub loses heat through the cover and walls while it warms, so the maker's own rate is slower.
  • Running cost = heater kW x heater hours a day, plus any filter pump that runs on its own, times your price per kWh. Thirty days for the month.

Worked examples

First heat-up, 60°F to 100°F, at 18 cents per kWh

TubWaterEnergy (at least)CostTime at 1,300 W (best case)Maker's rate
Intex PureSpa 4-person210 gal20.5 kWhabout $3.70about 15.8 hours2 to 3°F per hour
Intex PureSpa 6-person290 gal28.4 kWhabout $5.10about 21.8 hours1.1 to 2°F per hour

Intex's own rate (2 to 3°F an hour for 210 gallons) means a 40°F rise takes about 13 to 20 hours on the 4-person. The fast end of that range is quicker than 1,300 W alone could manage by the arithmetic above (3°F an hour on 210 gallons needs about 1.54 kW), so plan on the slow end. Start the first heat-up the day before you want to use it, with the cover on.

Monthly heater cost at 1,300 W and 18 cents per kWh

Heater hours a daykWh a daykWh a monthCost a month
45.2156about $28
810.4312about $56
1215.6468about $84
24 (heater never stops)31.2936about $168

Your heater hours are the unknown. They rise with cold air, wind, an uncovered tub and frequent use. The best way to find yours is to note the heater indicator over a typical week, or read your power bill before and after the tub goes up.

What the calculator leaves out

  • The bubble blower. Intex lists its PureSpa blower at 800 W. A 20-minute soak with bubbles is about 0.27 kWh (0.8 kW x 1/3 hour), or about 5 cents at 18 cents per kWh.
  • Heater and sanitizer interplay. On the PureSpa, Intex says the sanitation system and the heater cannot run at the same time.
  • Water and chemicals. CDC's guidance for public hot tubs is to drain and replace all or part of the water weekly to monthly depending on use; each refill means a new heat-up.

Ways to cut the bill

  • Keep the cover on and fastened. Intex's Amazon listing says its foam cover improves the spa's energy efficiency by as much as 50%.
  • Choose insulated walls for cold climates. Bestway's EnergySense SaluSpa tubs are sold as up to 40% more energy-efficient than similar tubs.
  • Heat on a schedule. Bestway's Power-Saving Timer schedules heating up to 40 days ahead.
  • Size down. Fewer gallons, less to heat.

Compare tubs on best inflatable hot tubs and tubs for winter.

Frequently asked questions

How much does an inflatable hot tub cost to run per month?

It depends on heater hours. At 1,300 W and 18 cents per kWh, 4 hours a day is about $28 a month, 8 hours about $56, and 12 hours about $84. Cold weather and an uncovered tub push the hours up.

How much electricity does it take to heat an inflatable hot tub?

At least gallons x 8.34 x the temperature rise, divided by 3,412, in kWh. Raising Intex's 210-gallon PureSpa from 60°F to 100°F takes at least 20.5 kWh, about $3.70 at 18 cents per kWh.

How long does an inflatable hot tub take to heat up?

Intex lists 2 to 3°F an hour for its 210-gallon PureSpa and 1.1 to 2°F an hour for the 290-gallon model, so a 40°F rise takes most of a day. Keep the cover on while it heats.

How many watts does an inflatable hot tub use?

Intex's PureSpa heater is 1,300 W at 110 to 120 V, and its bubble blower is 800 W, per its manual; the tub draws up to 13 A. Bestway lists its Hot Springs 4-6 at 12 A.

Is it cheaper to leave an inflatable hot tub on?

Not necessarily: every hour at temperature is heater time against heat loss. With a good cover, many owners keep it warm and use a heating timer; without one, heat loss makes holding temperature expensive. Measure your own heater hours.

Sources

  1. PureSpa Sahara Tan Round Bubble Spa Owner's Manual (380PO), Intex
  2. British thermal units (Btu), U.S. Energy Information Administration
  3. Electric Power Monthly, Table 5.6.A: Average Price of Electricity to Ultimate Customers by End-Use Sector, U.S. Energy Information Administration
  4. How big would a million-gallon swimming pool be? (8.34 lb per gallon), U.S. Geological Survey
  5. Operating and Managing Public Pools, Hot Tubs and Splash Pads, Centers for Disease Control and Prevention

Cover image: Illustration: Backyard Inflatable Review (AI-generated)

Share this article